The RV3000 valve refacer marks a new phase in valve refacing. It`s double “V” operation, instead of the traditional use of pliers or chucks, brings to very accurate results and is extremely easy. The peculiar valve locking system can be applied on a wide range of engines.
RV3000
Standard Equipment
- Allen wrench 2.5/3/4/5/6
- Open end wrench 8
- Valve drassing wheel
- Valve stop
- Diamond
- Diamond support and valve and refacer
Options
- Other eletric powers on request
- Adapter for valve stem lower than Ø 4
and lower than 70 mm length - Pair of valve supports for valve stems over Ø 16 mm
Specifications
| Valve stem diameter | 4 mm (5/32″) – 16 mm (10/16″) |
| Grinding sngle | 20°-60° |
| Maximum head diameter | 100 mm |
| Maximum head length | 400-450 mm |
| Valve length at 30° and 40° | 75 mm min |
| Head diameter 30° | 22 mm min |
| Head diameter 45° | 11 mm min |
| Grinding wheel size | 175 Ø x 30 mm |
| Grinding wheel speed | 2800 rpm |
| Elettric power | 230/400V 50Hz 3Ph |
| Valve dragging wheel speed | 14 rpm |
| Dimension | 800(31″ 1/2) x 600(23″ 3/5) x 600(23″ 3/5) |
| Weight | 109Kg (240Lbs) |
| Low tension driving control | |
| Moror-driven grinding wweel |
